CAR COLOR MATCH PAINT PROFESSIONAL

From a DIYer seeking a simple touchup to a professional body shop ordering paint for an overall refinish, all of our customers have different needs. Today, the automotive refinish category is much more complex than simply painting it black, and the options available to our customers are as confusing as they are colorful. While it’s true that from 1913 to 1925, the Tin Lizzie was only produced in black, 27 models actually were available in a wide range of colors. Apply 2K clear over the entire repair area.Henry Ford is credited with this infamous (if somewhat misused) quote regarding the Model T and its signature paint job.Apply pearlescent basecoats allowing them to overlap as much as is required for a homogeneous effect in the color shade.Reduce the ground coat further with 100% S1918 and blend into the original finish (after sanding with Scotch Brite or P2000).These shades depend on the color of the first coat and on the number of spray passes and the coat thickness of the 2nd layer (the pearlescent basecoat). With a flick of the gun apply the reduced paint on the adjacent pre-sanded panel (PZOOO or Scotch Brite). The basecoat has to be further reduced with 100% S1918 the pressure reduced to 1.5 bars instead of 3.5 bars.

The paint material has to be further reduced with 500% S2012 the pressure reduced to 1.5 bars instead of 3 5 bars You can then pick the narrowest area available and with a flick of the gun, apply the reduced paint over previously sanded panel (PZOOO or Scotch Brite). Otherwise shadows, clouds or other paint flaws may occur. The speed has to be maintained constant and the spray passes have to be evenly spread out. In any case, make sure that the paint is evenly applied to the surface by ensuring that the distance of the spray gun from the panel is constant.Īlso the gun has to be maintained at a 90 degree angle from the panel. When working with metallic paints, the following can be done to influence the color shade. Finally, the painter has to do his part to ensure a good color match by using the correct application, especially for metallicĮverything that keeps the paint wet for a longer time, changes the color.Fifteen minutes every morning and every can manually before it is placed on the mixing machine. Always work with the latest formula update.

Check the scales for proper functioning.

Ensuring that everything functions properly means that you save time and thus money. The success of the Work depends on the condition of the workplace. Of course, the refinish suppliers have to ensure adequate quality control on every base color produced and then comes the mixing. The car manufacturer has to provide the refinish suppliers with any color variations which have occurred. Next the car manufacturer has to do his part to ensure that the OEM paint is being applied in accordance to the manufacturer`s specifications and that adequate cleaning has been made on all painting equipment when changing colors. Keep in mind that a car manufacturer may have different paint suppliers for the same color. lt all starts with the OEM supplier who has to guarantee that every batch is as close as possible to the reference.

Weigh the paint according to the formula.Ī good color match is dependant on a lot of people putting their best effort together in order to reach the desired goal.

Retrieve the mixing formula from GPC Software.

Determine which of the variant colors is closest to the car shade.

Make sure the vehicle has not been resprayed before.

Polish area adjacent to the damaged spot.

Every refinishing job starts with the right identification of the color shade.

Aside from the widespread solid colors, metallic finishes are nowadays much more common than only a few years back.Ĭertain steps are required in order to ensure a good match.

Car color match paint